- Crude oil
- Hydrocarbon exploration
- Natural gas
Saturday, September 5, 2009
Oil and gas
Oil and gas is a collective term that refers to liquid and gas hydrocarbons extracted from the subsurface. The term oil and gas may refer to:
Future of petroleum production
The future of petroleum as a fuel remains somewhat controversial. USA Today news reported in 2004 that there were 40 years of petroleum left in the ground. Some argue that because the total amount of petroleum is finite, the dire predictions of the 1970s have merely been postponed. Others claim that technology will continue to allow for the production of cheap hydrocarbons and that the earth has vast sources of unconventional petroleum reserves in the form of tar sands, bitumen fields and oil shale that will allow for petroleum use to continue in the future. They argue that both the Canadian tar sands and United States oil shale deposits represent potential reserves with just as much oil as current liquid petroleum deposits.
Price of petroleum
After the collapse of the OPEC-administered pricing system in 1985, and a short lived experiment with netback pricing, oil-exporting countries adopted a market-linked pricing mechanism.[25] First adopted by PEMEX in 1986, market-linked pricing received wide acceptance and by 1988 became and still is the main method for pricing crude oil in international trade.[25] The current reference, or pricing markers, are Brent, WTI .
Petroleum industry
The petroleum industry is involved in the global processes of exploration, extraction, refining, transporting (often with oil tankers and pipelines), and marketing petroleum products. The largest volume products of the industry are fuel oil and gasoline (petrol). Petroleum is also the raw material for many chemical products, including pharmaceuticals, solvents, fertilizers, pesticides, and plastics. The industry is usually divided into three major components: upstream, midstream and downstream. Midstream operations are usually included in the downstream category.
Petroleum is vital to many industries, and is of importance to the maintenance of industrialized civilization itself, and thus is critical concern to many nations. Oil accounts for a large percentage of the world’s energy consumption, ranging from a low of 32% for Europe and Asia, up to a high of 53% for the Middle East. Other geographic regions’ consumption patterns are as follows: South and Central America (44%), Africa (41%), and North America (40%). The world at large consumes 30 billion barrels (4.8 km³) of oil per year, and the top oil consumers largely consist of developed nations. In fact, 24% of the oil consumed in 2004 went to the United States alone [20], though by 2007 this had dropped to 21% of world oil consumed.
In the US, in the states of Arizona, California, Hawaii, Nevada, Oregon and Washington, the Western States Petroleum Association (WSPA) is responsible for producing, distributing, refining, transporting and marketing petroleum. This non-profit trade association was founded in 1907, and is the oldest petroleum trade association in the United States.
Petroleum is vital to many industries, and is of importance to the maintenance of industrialized civilization itself, and thus is critical concern to many nations. Oil accounts for a large percentage of the world’s energy consumption, ranging from a low of 32% for Europe and Asia, up to a high of 53% for the Middle East. Other geographic regions’ consumption patterns are as follows: South and Central America (44%), Africa (41%), and North America (40%). The world at large consumes 30 billion barrels (4.8 km³) of oil per year, and the top oil consumers largely consist of developed nations. In fact, 24% of the oil consumed in 2004 went to the United States alone [20], though by 2007 this had dropped to 21% of world oil consumed.
In the US, in the states of Arizona, California, Hawaii, Nevada, Oregon and Washington, the Western States Petroleum Association (WSPA) is responsible for producing, distributing, refining, transporting and marketing petroleum. This non-profit trade association was founded in 1907, and is the oldest petroleum trade association in the United States.
Sunday, August 30, 2009
Oil reserves
Oil reserves are the estimated quantities of crude oil that are claimed to be recoverable under existing economic and operating conditions.[1]
The total estimated amount of oil in an oil reservoir, including both producible and non-producible oil, is called oil in place. However, because of reservoir characteristics and limitations in petroleum extraction technologies, only a fraction of this oil can be brought to the surface, and it is only this producible fraction that is considered to be reserves. The ratio of producible oil reserves to total oil in place for a given field is often referred to as the recovery factor. Recovery factors vary greatly among oil fields. The recovery factor of any particular field may change over time based on operating history and in response to changes in technology and economics. The recovery factor may also rise over time if additional investment is made in enhanced oil recovery techniques such as gas injection, water-flooding[2], or microbial enhanced oil recovery.
Because the geology of the subsurface cannot be examined directly, indirect techniques must be used to estimate the size and recoverability of the resource. While new technologies have increased the accuracy of these techniques, significant uncertainties still remain. In general, most early estimates of the reserves of an oil field are conservative and tend to grow with time. This phenomenon is called reserves growth.[3]
Many oil producing nations do not reveal their reservoir engineering field data, and instead provide unaudited claims for their oil reserves. The numbers disclosed by some national governments are suspected of being manipulated for political reasons.
The total estimated amount of oil in an oil reservoir, including both producible and non-producible oil, is called oil in place. However, because of reservoir characteristics and limitations in petroleum extraction technologies, only a fraction of this oil can be brought to the surface, and it is only this producible fraction that is considered to be reserves. The ratio of producible oil reserves to total oil in place for a given field is often referred to as the recovery factor. Recovery factors vary greatly among oil fields. The recovery factor of any particular field may change over time based on operating history and in response to changes in technology and economics. The recovery factor may also rise over time if additional investment is made in enhanced oil recovery techniques such as gas injection, water-flooding[2], or microbial enhanced oil recovery.
Because the geology of the subsurface cannot be examined directly, indirect techniques must be used to estimate the size and recoverability of the resource. While new technologies have increased the accuracy of these techniques, significant uncertainties still remain. In general, most early estimates of the reserves of an oil field are conservative and tend to grow with time. This phenomenon is called reserves growth.[3]
Many oil producing nations do not reveal their reservoir engineering field data, and instead provide unaudited claims for their oil reserves. The numbers disclosed by some national governments are suspected of being manipulated for political reasons.
Classifications
Reserves are those quantities of petroleum claimed to be commercially recoverable by application of development projects to known accumulations under defined conditions.[6] Reserves must satisfy four criteria: They must be:
discovered through one or more exploratory wells[6]
recoverable using existing technology[6]
commercially viable[6]
remaining in the ground[6]
All reserve estimates involve uncertainty, depending on the amount of reliable geologic and engineering data available and the interpretation of those data. The relative degree of uncertainty can be expressed by dividing reserves into two principal classifications - proved and unproved.[6] Unproved reserves can further be divided into two subcategories - probable and possible to indicate the relative degree of uncertainty about their existence.[6] The most commonly accepted definitions of these are based on those approved by the Society of Petroleum Engineers (SPE) and the World Petroleum Council (WPC) in 1997
discovered through one or more exploratory wells[6]
recoverable using existing technology[6]
commercially viable[6]
remaining in the ground[6]
All reserve estimates involve uncertainty, depending on the amount of reliable geologic and engineering data available and the interpretation of those data. The relative degree of uncertainty can be expressed by dividing reserves into two principal classifications - proved and unproved.[6] Unproved reserves can further be divided into two subcategories - probable and possible to indicate the relative degree of uncertainty about their existence.[6] The most commonly accepted definitions of these are based on those approved by the Society of Petroleum Engineers (SPE) and the World Petroleum Council (WPC) in 1997
Proved reserves
Proved reserves are those reserves claimed to have a reasonable certainty (normally at least 90% confidence) of being recoverable under existing economic and political conditions, with existing technology. Industry specialists refer to this as P90 (i.e. having a 90% certainty of being produced). Proved reserves are also known in the industry as 1P.[8][9]
Proved reserves are further subdivided into Proved Developed (PD) and Proved Undeveloped (PUD).[9][10] PD reserves are reserves that can be produced with existing wells and perforations, or from additional reservoirs where minimal additional investment (operating expense) is required.[10] PUD reserves require additional capital investment (e.g. drilling new wells) to bring the oil to the surface.[8][10]
Proved reserves are the only type the U.S. Securities and Exchange Commission allows oil companies to report to investors. Companies listed on U.S. stock exchanges must substantiate their claims, but many governments and national oil companies do not disclose verifying data to support their claims.
Proved reserves are further subdivided into Proved Developed (PD) and Proved Undeveloped (PUD).[9][10] PD reserves are reserves that can be produced with existing wells and perforations, or from additional reservoirs where minimal additional investment (operating expense) is required.[10] PUD reserves require additional capital investment (e.g. drilling new wells) to bring the oil to the surface.[8][10]
Proved reserves are the only type the U.S. Securities and Exchange Commission allows oil companies to report to investors. Companies listed on U.S. stock exchanges must substantiate their claims, but many governments and national oil companies do not disclose verifying data to support their claims.
Subscribe to:
Posts (Atom)